Product ID:AMERCOAT 3203
MSDS Date:07/30/1992
FSC:8010
NIIN:01-344-5322
MSDS Number: BRNYM

AMERON INC PROTECTIVE COATINGS DIV

201 N BERRY ST
BREA, CA 92622-1020
US

Emergency Phone: 800-424-9300 CHEMTREC

Info Phone: 714-529-1951 (H. KLINE)

Cage: 55849

AMERON INTERNATIONAL PROTECTIVE COATINGS GROUP

BREA, CA 92821 US

Telephone: 714-529-1951

Cage: 55849

ALKYD RESIN (VAPOR PRESSURE 3.24 MM HG @ 68F)

Fraction By Weight: <45%

TALC (ASBESTOS FREE) (LD50 2.1 G/KG; LC50 510 PPM)

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: <25%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3

TITANIUM DIOXIDE (CONTENT DEPENDS ON COLOR)(LD50 24

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: <25%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

METHYL N-AMYL KETONE (VAPOR PRESSURE 4 MM HG @ 68F) (LD50

CAS: 110-43-0

RTECS: MJ5075000

Fraction By Weight: 16.94%

OSHA PEL 100 PPM; 465 MG/M3

ACGIH TLV: 50 PPM; 235 MG/M3

BLACK IRON OXIDE (AS FE FUME; PB <10 PPM, CD 2-6 PPM, AS 3

CAS: 1317-61-9

Fraction By Weight: <15%

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3

BUTYL ACETATE (CERCLA) (VAPOR PRESSURE 10 MM HG @ 68F)

CAS: 123-86-4

RTECS: AF7350000

Fraction By Weight: 8.46%

OSHA PEL 150 PPM

ACGIH TLV: 150 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

IRON OXIDE (PIGMENT DEPENDENT ON COLOR) (LD50 >10 G/KG)

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: <10%

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293

MICA (CONTAINS 0.1% OR LESS SILICA) (PROP 65)

CAS: 12001-26-2

RTECS: VV8760000

Fraction By Weight: <5%

OSHA PEL 20 MPPCF

ACGIH TLV: 3 MG/M3 RDUST; 9293

CARBON BLACK (PIGMENT DEPENDENT ON COLOR)

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: <5%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3

MINERAL SPIRITS (BENZENE [PROP 65] @ <50 PPB) (VAPOR

CAS: 8052-41-3

RTECS: WJ8925000

Fraction By Weight: 1.79%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM; 9293

Health Hazards Acute and Chronic:VAPOR/MIST HARMFUL. EYE, SKIN, NOSE,
THROAT IRRIT. INHAL: HEADACHE, NAUSEA, DIZZINESS.
REPEATED/PROLONGED OVEREXPOSURE ASSOCIATED W/PERM BRAIN & NERVOUS
SYSTEM DAMAGE. CAN BE HARMFUL IF SWALLOWED/INHA LED/ABSORBED THRU
SKIN. KIDNEY, LIVER, LUNG, CENTRAL NERV SYS DAMAGE. EYE INJURY.
CHEMICAL PNEUMONIA. ASPIRATION HAZARD.
Medical Cond Aggravated by Exposure:RESPIRATORY. SKIN.

First Aid:OVEREXPOSURE TO VAPOR OR SPRAY MIST - PROVIDE FRESH AIR. IF
BREATHING LABORED, GIVE OXYGEN OR ARTIFICIAL RESPIRATION. SKIN:
WASH THOROUGHLY WITH SOAP & WATER. EYES: FLUSH IMMEDIATELY WITH
PLENTY OF WA TER FOR AT LEAST 15 MINUTES. GET MED AID. INGESTION:
DRINK 1 OR 2 GLASSES OF WATER TO DILUTE. DON'T INDUCE VOMITING.
CONSULT PHYSICIAN OR POISON CONTROL CENTER IMMEDIATELY. TREAT
SYMPTOMATICALLY.

Flash Point Method:SCC
Flash Point:95.0F,35.0C
Lower Limits:1.00
Upper Limits:8.00
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:WEAR FULL PROTECTIVE EQUIPMENT, SELF-CONTAINED
BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINER MAY EXPLODE W/EXTREME
HEAT. KEEP FROM HEAT/IGNIT SOURCE. PREVENT STATIC DISCHARGE.
FLOATING FIRE HAZARD. VAPOR SPREAD LONG DISTANCES-FLASHBACK.

Spill Release Procedures:AVOID BREATHING OF VAPORS. USE ABSORBENT
CLEANUP MATERIALS. PLACE IN SEPARATE CONTAINER. KEEP OUT OF SEWERS
AND WATERWAYS. IF ENTRY IS THREATENED OR OCCURS, NOTIFY LOCAL
AUTHORITIES. ELIMINATE ALL SOU RCES OF IGNITION.

Handling and Storage Precautions:KEEP CONTAINERS CLOSED, UPRIGHT WHEN
NOT IN USE. STORE IN COOL, DRY, WELL-VENTILATED AREA. AVOID STORAGE
TEMPERATURES ABOVE 100 F.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID PROLONGED BREATHING OF
VAPORS OR SPRAY MIST OR CONTACT WITH SKIN & EYES. DO NOT WELD OR
FLAME CUT AN EMPTY CONTAINER. GROUND CONTAINERS WHEN POURING.

Respiratory Protection:NIOSH/MSHA RESPIRATOR. FOR SPECIFIC CONDITIONS,
REFER TO CURRENT NIOSH POCKET GUIDE TO CHEMICAL HAZARDS. USE AIR
LINE RESPIRATOR IN CONFINED OR RESTRICTED VENTILATION AREAS. REFER
TO 29 CFR, OSHA PART S 1910 & 1915 FOR COATING OPERATIONS.
Ventilation:VENT TO KEEP AIR CONTAM CONCENTRATION BELOW TLV. REMOVE
WELDING OR FLAME CUTTING DECOMP PRODUCTS. SEE 29 CFR 1910 & 1915
Protective Gloves:NEOPRENE, IMPERVIOUS MATERIALS
Eye Protection:SPLASH PROOF GOGGLES OR FACE SHIELD
Other Protective Equipment:FULL PROTECTIVE CLOTHING. SPARK-PROOF
EQUIPMENT.
Work Hygienic Practices:WASH THOROUGHLY BEFORE EATING, SMOKING OR USING
WASHROOM. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health

HCC:F3
Boiling Pt:B.P. Text:252 TO 315F
Vapor Density:> AIR
Evaporation Rate & Reference:0.13 TO 1.00 (BU AC=1)
Appearance and Odor:LIQUID, SOLVENT ODOR
Percent Volatiles by Volume:40

Stability Indicator/Materials to Avoid:NO
STRONG OXIDIZERS, ACIDS, ALKALIES.
Stability Condition to Avoid:HEAT, OPEN FLAME, ARC, OR SPARKS.
Hazardous Decomposition Products:CO, AND CO2. IRON OXIDE FUMES.

Waste Disposal Methods:IN SEPERATE, CLOSED METAL CONTAINERS IN
ACCORDANCE WITH ALL APPLICABLE REGULATIONS. EPA WASTE NO: D001.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.